WEEK 7 (FYP 2)

Title: Arduino Software 1.6.8

Objective:
 -  To study about Arduino software

Activity:

Arduino Software

The Arduino hardware has built-in support for serial communication on pins 0 and 1 (which also goes to the computer via the USB connection). The native serial support happens via a piece of hardware (built into the chip) called a UART. This hardware allows the Atmega chip to receive serial communication even while working on other tasks, as long as there room in the 64 byte serial buffer.

The SoftwareSerial library has been developed to allow serial communication on other digital pins of the Arduino, using software to replicate the functionality (hence the name "SoftwareSerial"). It is possible to have multiple software serial ports with speeds up to 115200 bps. A parameter enables inverted signaling for devices which require that protocol.

Conclusion : 

- I know how to use the application of arduino software.

- Arduino software easy to use because it have already basic coding in library arduino          software

WEEK 6 (FYP 2)

Activity: Student attend the second Final Year Project 2 briefing.The briefing was by Miss Pusparini                 Dewi Abd. Aziz.


Objective: Briefing (Introduction, Literature Review, and Methodology)

Content: In this briefing, the FYP committees have been brief us about:

      HOW TO WRITE A STRONG THESIS STATEMENT....

•           understand the academic writing task.
•         Familiar with the different kinds of thesis statements.
•          Formulate a research question.
•          Formulate a tentative thesis statement.
•          Examine a contradiction.
•          Write a thesis statement as a complex sentence.
•          Test the thesis statement by considering the following questions.

WEEK 5 (FYP 2)

Title : Block Diagram Of Project

Objective : To identify overall system of the project.

                                                           
                                                          Figure: Block Diagram

The block diagram of multitasking wireless robot is shown in Figure. The diagram consists of power supply, Arduino UNO, remote, receiver transmitter and motor driver to control right and left motor for movement. The block diagram explains the simple working of the whole system developed. 

WEEK 4 (FYP 2)

Title:  Redefine the methods to create the system 

The third week is about redefine the methods to create the system. After further research, i found that there are few changes need to be made. I purchase the all component that i need at Jalan Pasar. Here the list of component:

Hardware :

1. Dc Motor
2. Wheel
3. Motor Driver
4. Receiver
5. Transmitter
6. Casing
7. Arduino uno 

After further understanding, here are the  software that will be use in this project :

 Software:

1. Protues
2. Arduino software

WEEK 3 (FYP 2)

Activity: Student attend the first Final Year Project 2 briefing. The briefing was 
               conducted in TTL2 and the attendance for all  the student that are taking 
               the FYP 2 was compulsory.


Objective: To understand the flow of the FYP 2 project.


Content: The briefing conduct by FYP coordinator Dr. Siti Marwangi Binti Mohamad Maharum

• Code of the Subject FYP must be correct and student should be register the project title for minor amendment before week 8.
• Assessment that need to be cover for FYP 2 which is final report (logbook/blog), presentation, and project proposal.
•  FYP 2 should be continues after the proposal report with do the result&analysis, discussions, and conclusion of overall project.
• FYP 2 activities along this semester.

WEEK 2 (FYP 2)

Details About The Project

Title: Development Of Wireless Multitasking Robot

About:

•      Development of Wireless Multitasking Robot Using Arduino UNO, Motor Driver,             Receiver Transmitter
•       Multitasking wireless robot that can clean the floor.
•      Can be controlled by transmitter (remote controller).
•      Robot can be controlled in long distance.

      Objective:

    

       1.       To design the prototype of multitasking wireless robot that can clean the floor.

             2.      To save the manpower to provide robot can do a task.

             3.      To analyze the simulation of robot considering using Arduino

WEEK 1 (FYP 2)

Activity :

The first week of my FYP 2 is now begins. So now i need to continue the progress of my project from FYP 1 that have been left before from last Semester.

Objectives :

• To introduce the FYP 2.
• To continue the progress from FYP 1.

Conclusion :

The project for "Development Wireless Multitasking Robot Using Arduino" is now officially start.